







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Aventura Homeowners Choose PGT Construction
We provide independent PGT window and door service and installation throughout Aventura, FL. That means we diagnose, repair and install PGT impact windows and sliding glass doors right here in the city’s high-rise condos and townhomes, using parts that fit the product and installation practices that respect its rating. We are not PGT, and we are not authorized, sponsored or endorsed by the manufacturer. We’re an independent local contractor that knows how these products actually behave in salt air and hurricane-season wind.
That distinction matters in Aventura. A PGT unit that’s dragging, fogging or leaking isn’t a warranty claim by default, and a distributor quote isn’t the only answer. We read the symptom, trace the cause, and give you a straight repair-or-replace recommendation in writing. Our technicians have up to 15 years of experience with impact glazing, sliding door hardware and the aluminum and vinyl frames these products are built on. Call (833) 620-6514 for a free estimate.
Why Trust Construction Aventura for Your PGT Construction?

Aventura is a vertical city. Nearly every project here is a condo or multifamily renovation governed by Miami-Dade County’s 40-Year Building Safety Recertification and post-Surfside milestone inspection rules, so the contractors who work here specialize in occupied high-rise buildings, not single-family builds. We know what that means for window and door work: the panel has to come out through a protected corridor, noisy work is restricted to weekday hours, and the association’s engineer often wants documentation before anything changes on a façade.
Our technicians are used to PGT WinGuard aluminum and vinyl impact windows, the Premier Aluminum series, and impact-rated sliding glass doors. They know what a worn tandem roller feels like versus a bent track, and they know why an insulated glass unit fogs from the inside in a coastal building. We also pull our own permits where a permit is required and keep the paperwork clean for your building. Our technicians have up to 15 years of experience, and we work on these products every week. Estimates are free and written line-item, so you see the price before anyone touches a frame.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common PGT Construction Problems We Fix in Aventura
Impact windows and doors are engineered for wind loads and water. In a city where salt hangs in the air and hurricane-season rain arrives sideways, the parts that seal and move are the parts that fail first. These are the PGT problems we see most in Aventura.
- Compressed weatherstripping and failed pile seals on sliding glass doors. The seal at the panel edge flattens and hardens over time, and salt air speeds that up. Once it’s gone, wind pushes water past the interlock and the door whistles in a storm. That whistle is the seal talking, not the glass.
- Worn or broken tandem rollers on sliding door panels. Rollers carry the full weight of an impact panel, which is heavy. When the wheels wear flat or the bearings go, the panel drags near the latch and jumps the track. Forcing it only bends the frame and makes the repair bigger.
- Fogging IGUs on WinGuard units. The seal around an insulated glass unit eventually fails after years of UV and salt exposure, and moisture gets between the panes. Fog or a cloudy film that won’t clean off is a glass-unit failure, not a cleaning problem.
- Corroded impact-glazing gaskets and blocked weep holes. The gasket that holds the glazing in the aluminum frame can harden and pull away. When weep holes clog with debris and salt residue, water pools in the frame channel instead of draining out.
- Loose anchors and perimeter sealant at the rough opening. On a high-rise façade, water often gets in at the perimeter, not the panel. Degraded sealant and loose anchors let wind-driven rain work its way behind the frame and show up as a “window leak” that isn’t one.
Here’s how this usually goes. A homeowner notices a PGT sliding glass door that drags near the latch and whistles in wind, and an inspector finds worn tandem rollers plus compressed weatherstripping. A qualified local pro typically pulls the panel, replaces the roller assemblies and pile seals with PGT-compatible parts, checks the weep holes and track drainage, and re-hangs and aligns the panel. The whole unit gets replaced only if the frame or impact glazing is compromised.
PGT Parts & Our Repair-vs-Replace Approach

We don’t stock genuine PGT parts, and we don’t claim to. What we do is source parts that fit your specific unit: rollers, weatherstripping, pile seals and gaskets matched to the frame and glazing system. OEM parts are the first choice because they preserve fit and the original impact rating. When an OEM part is discontinued or the cost outweighs the value, we’ll tell you plainly and offer a quality aftermarket alternative that fits the same way.
Repair is usually the right call on frames and hardware. A new roller set and fresh seals restore a door that’s structurally sound. The decision tips toward replacement when an insulated glass unit has failed, when impact glazing is compromised, or when the frame itself is corroded or bent. We put that recommendation in writing with the reasoning attached, and you decide. Call (833) 620-6514 for a free estimate and a straight answer on which path fits your unit.
Our PGT Service Process – Step by Step
- 1
Diagnosis. We look at the whole opening, not just the symptom. Panel movement, seal condition, weep hole drainage, perimeter sealant and glass clarity all get checked, because a fogged IGU and a leaky seal can look alike from inside.
- 2
Repair or install. For repair, panels come out and hardware gets replaced with parts that fit PGT frames. For installation, we set the unit square, shim and anchor it correctly, and seal the perimeter to withstand wind-driven rain.
- 3
Test. We operate every door and window through its full range, check the latch and lock engagement, confirm the weep holes drain, and verify the panel runs smooth on the new rollers. On installations we check the perimeter seal before we call it done.
- 4
Warranty and paperwork. You get the parts used and the work performed in writing, plus the manufacturer documentation that applies to any new unit. If your building or association needs records for its recertification file, we make sure you have them.
See the difference
Before
After
Before
After
Before
AfterPGT Products We Service & Install in Aventura
We work on the PGT products that actually show up in Aventura buildings: WinGuard aluminum impact windows and doors, WinGuard vinyl impact windows, the Premier Aluminum series, and impact-rated sliding glass doors. On the installation side, we set new impact window and door units, and we handle the roofing above them, which matters more than most owners expect. We don’t claim to stock these products. We service and install them, and we’ll tell you honestly when a unit is beyond repair.
We Also Service These Brands
PGT is one part of what we do. We also work with KraftMaid cabinetry, Kohler fixtures, GAF roofing systems and Master Halco fencing, along with dozens of other manufacturer brands across every trade we cover. That range means we’re not locked into one product line or one answer. If a PGT repair is the right call, we’ll say so. If a different approach fits your building and budget better, we’ll say that too.
FAQs – PGT Construction Service in Aventura

No. We are an independent contractor and are not authorized, sponsored or endorsed by PGT. We service and install PGT products, but any manufacturer warranty runs through PGT and its own terms, not through us. We work with your warranty, we don’t speak for it.
Yes. We source OEM PGT parts whenever they’re available, because they preserve fit and impact rating. When OEM is discontinued or cost-prohibitive, we use quality aftermarket hardware that fits the same way, and we tell you which one you’re getting before the work starts.
Most hardware and seal repairs finish in a single visit. Glass unit replacements and full window or door installations take longer because of ordering and building coordination. Every Aventura condo tower has its own rules on work hours and deliveries, and we build that into the schedule before we start. Call (833) 620-6514 to get a timeline for your unit.
We cover the impact windows and doors PGT makes for South Florida homes, including aluminum and vinyl impact windows, sliding glass doors, and the hardware and glass units inside them. That means rollers, seals, gaskets, insulated glass units and full unit installation.
Not automatically, but it depends on what’s done and by whom. Improper installation or the wrong hardware can affect a claim. We document the parts and work we perform so your warranty position stays clear, and we’ll tell you upfront if a repair could put a manufacturer warranty at risk.
Here are typical estimated ranges for the work we do around PGT windows and doors in Aventura. The written estimate sets the final price.
| Service | Typical Estimated Range |
|---|---|
| Impact Window Installation | $8,000 – $25,000 |
| Window Replacement | $4,500 – $15,000 |
| Roof Replacement | $8,000 – $20,000 |
| Roof Repair | $400 – $1,800 |
Call (833) 620-6514 for an exact quote. Estimates are free.
Book Your PGT Service in Aventura, FL
If a PGT window or door in your Aventura home is dragging, fogging, whistling or leaking, we’ll find the cause and tell you honestly whether it’s a repair or a replacement. Call (833) 620-6514. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free and written line-item. One contractor, every scope, from the frame to the roof above it.
Written by the team at Construction Aventura.












