







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Aventura Homeowners Choose Belgard Construction
Construction Aventura provides independent Belgard construction service across Aventura, handling installation, repair and replacement of Belgard pavers, patio systems and retaining wall block. We work with Belgard’s concrete paver and wall catalogs every week, so we can match face profiles, modular sizing and color families instead of guessing. One important note up front: we are an independent Belgard service provider. Belgard has not authorized, certified or endorsed us, and we don’t speak for the manufacturer.
Aventura is a vertical city. Nearly every project here happens inside a condo or multifamily building, and much of the renovation work is governed by Miami-Dade County’s 40-Year Building Safety Recertification and the post-Surfside milestone inspection rules. That shapes our Belgard work directly. Owners on Biscayne Boulevard and in gated communities like Williams Island are dealing with concrete balconies, impact-glass window walls and aging plumbing and electrical risers, and a paver or wall project on a terrace or courtyard has to clear the association’s engineer and the city’s structural inspection report before anyone lays a unit. Noisy work is usually restricted to weekday hours so year-round residents and snowbirds aren’t disturbed.
Call (833) 620-6514 to talk through your Belgard project. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Construction Aventura for Your Belgard Construction?

Our technicians have up to 15 years of experience with concrete paver and segmental wall systems. We know the modular sizing on Belgard’s concrete paver families, how the face profiles interact when you mix units in a border, and what changes when a color-through body sits in afternoon sun over a long service life. That familiarity comes from installing and repairing the product, not from a badge.
Belgard pavers and wall block are engineered systems, and they behave like one. A unit that sits on a base compacted in proper lifts, with edge restraint pinned and a drainage outlet that actually works, stays put. A unit on a shallow base over sandy subgrade will rock, shed its joint sand and grow a white salt haze no matter how well it was laid. We diagnose the base before we touch the surface, because replacing pavers over bad subgrade is a repeat visit waiting to happen.
We use quality parts that fit Belgard equipment. For anything visible, that means the same product family, because color and face-profile matches only come from there. Where a repair can be done without pulling a whole run, we do it that way, and where the base or the wall is the actual problem, we say so plainly before the first paver comes up. That’s how a warranty stays intact and a repair stays a repair.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Belgard Construction Problems We Fix in Aventura
Subtropical salt-air exposure and hurricane-season wind-driven rain beat on hardscape here in ways that inland installs never see. These are the failures that come up most often in Aventura.
- Efflorescence bloom and white salt haze. Moisture wicks up through a base that wasn’t compacted in lifts, or that has no proper drainage outlet, and pushes mineral salts to the surface of the concrete paver. It looks like a stain but it’s a moisture symptom, and sealing over it traps the problem instead of fixing it.
- Joint sand washout and rocking units. After heavy rain, pavers shift and rock because polymeric sand wasn’t installed wet-cured and the edge restraint isn’t pinned into the compacted base. Once the restraint lets go, the outer course opens and the whole run loses its lock.
- Color fade and surface scaling on older runs. Catalina Grana and Dublin Cobble installations exposed to full afternoon sun and salt-laden air off the Intracoastal show tonal drift and surface scaling as the years add up. Salt air plus UV is a slow grind on any concrete paver.
- Wall block separation and loose capstones. Mega-Bergerac and Bergerac walls separate when the geogrid wasn’t installed in the right courses for the retained height. A wall that leans even slightly is telling you the reinforcement is short, not that the block is bad.
- Drainage slope failure at the slab edge. Water that can’t drain away from a balcony or patio edge sits against the base and accelerates everything above. On high-rise terraces it also puts water against the building, which is the last thing a post-Surfside inspection wants to find.
Belgard Parts & Our Repair-vs-Replace Approach

We use Belgard OEM pavers and wall block for any visible repair. Color matching and face-profile matching only come from the same family, and the concrete pavers in the Bergerac and Catalina lines are the only reliable way to keep a run looking continuous. We don’t stock or carry genuine Belgard parts, and we’re not a dealer. We source what the job needs and we tell you where it comes from.
The repair-or-replace call comes down to the base. A localized failure on a sound base gets the module pulled, the base checked and re-compacted, and the unit reinstalled with fresh edge restraint and polymeric joint sand. Widespread settlement or wall lean is a different conversation. In that case the honest answer is to rebuild the base or the wall rather than keep patching pavers that will keep moving. It costs more up front and less over the next few years.
Call (833) 620-6514 for a free estimate and a straight answer on which side of that line your project falls.
Our Belgard Service Process – Step by Step
- 1
Diagnosis. We read the whole system: joint sand condition, edge restraint, drainage slope, base depth and compaction, and on walls the geogrid placement against retained height. On a condo terrace we also check what the association’s engineer needs to see.
- 2
Scope and materials. We identify the Belgard family, confirm the color and face profile, and lay out which units can be lifted and reset versus replaced.
- 3
Repair or installation. Base re-compaction in proper lifts, drainage restored, edge restraint pinned, units set, polymeric sand installed wet-cured. Walls get geogrid in the right courses before block goes back.
- 4
Verification. We check slope with water, walk the field for rockers, and confirm the wall is plumb and the capstones are set. Building or association sign-off happens here.
- 5
Warranty and maintenance guidance. You get the manufacturer paperwork you need plus a plain explanation of what to watch for and how to keep the joints and drainage healthy in salt air.
See the difference
Before
After
Before
After
Before
AfterBelgard Products We Service & Install in Aventura

We install and repair Belgard’s concrete paver lines, including modular units like Urbana Stone in 6×12 and 6×6, and tumbled pavers such as Catalina Grana and Dublin Cobble with their granite-like tonal blend. On the vertical side we work with Mega-Bergerac and Bergerac segmental wall block, from base course through capstone. Our paver patio installation, paver driveway installation and driveway replacement work makes up most of what we do here, and the ocean-facing balconies and courtyard terraces common along the Intracoastal are where wall and drainage detail matters most. We can’t tell you how common any product is in a given building; we can tell you how it behaves once it’s down.
A Catalina Grana or Dublin Cobble run on a driveway or patio typically shows up as rocking units, sand loss from the joints, and white efflorescence streaking after the summer rains. The usual cause is a base that wasn’t compacted in proper lifts or doesn’t drain away from the slab edge, so water sits and moves the pavers. A qualified hardscape pro pulls the affected units, checks and re-compacts the base, restores the drainage slope, and reinstalls with fresh edge restraint and polymeric joint sand.
Typical Belgard Pricing in Aventura
| Service | Typical Estimated Range |
|---|---|
| Paver Patio Installation | $3,500 – $11,000 |
| Paver Driveway Installation | $7,000 – $18,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
These ranges are typical estimates for the Aventura market. The written estimate sets the final price for your project.
We Also Service These Brands
Belgard is one hardscape manufacturer among many we work with. The same crews handle KraftMaid cabinetry, Kohler plumbing fixtures, GAF roofing systems and PGT impact windows and doors, and we install pavers from Unilock, Tremron, Techo-Bloc and Cambridge Pavers alongside Belgard. If a project touches more than one scope, you’re working with one contractor instead of three.
FAQs – Belgard Construction Service in Aventura
No. We are an independent Belgard service provider. Belgard has not authorized, certified or endorsed us, and nothing we say here should be read as a manufacturer statement. We install and repair Belgard products because we know them, not because of a dealer relationship.
Only after the moisture source is fixed, not before. Sealing a paver run that’s still wicking moisture from a bad base traps that moisture and makes efflorescence worse. Once the base and drainage are correct, a breathable sealer helps against salt air and UV here, but it’s maintenance, not a cure. Call (833) 620-6514 for a free estimate on the repair and sealing scope together.
That white haze is efflorescence, mineral salts drawn to the surface by moisture moving up through the base. It’s a drainage or compaction symptom, not dirt. Clearing it without addressing the base just means it comes back after the next summer rain. Call (833) 620-6514 and we’ll diagnose the source.
Usually yes, if the base under that area is sound. A single unit can be lifted, the base checked and re-compacted, and the paver reset with matching joint sand. If the units around it are already rocking, the problem is under them and a spot replacement won’t hold. Call (833) 620-6514 for a free estimate and a straight answer.
It depends on the application: a pedestrian patio and a driveway carrying vehicles need different base depths, and the subgrade conditions under a terrace or slab edge change the math. The requirement that matters is compaction in proper lifts with a drainage outlet, not a single number pulled from a chart. The written estimate specifies the build-up we’ll use.
Look at plumb. A wall that has leaned at all, or shows capstones drifting or block courses separating, has a reinforcement problem, and repointing the joints won’t hold it. A Mega-Bergerac or Bergerac wall needs geogrid in the right courses for the retained height, and if that isn’t there the fix is a rebuild. Call (833) 620-6514 for a free assessment.
Typical estimated ranges here run $3,500 – $11,000 for a paver patio installation, $7,000 – $18,000 for a paver driveway installation, $5,000 – $14,000 for driveway replacement and $250 – $700 for driveway sealing. Every project is priced per job, and the written estimate sets the final price. Call (833) 620-6514 for an exact quote; estimates are free.
Book Your Belgard Service in Aventura, FL
Whether your Belgard pavers are rocking, your wall is leaning or you’re planning a new patio or driveway, we’ll diagnose the base and give you a written estimate with the material family and scope spelled out. Our technicians have up to 15 years of experience, and we work with your building’s engineer and the city’s inspection requirements as part of the job. Call (833) 620-6514 to schedule your free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Aventura.












